Ceramic car coating guarantees ultimate shine and protection
Trying to keep a car looking brand new can be costly and end up feeling like endless work. All that washing, waxing, and attention feels futile when a bird finds its target ten minutes after you are done. And it isn’t just the birds; UV radiation, chips, stains, dirt, swirl marks, all of these mean that the glossy newness of your coat starts to fade and wear. Which is where ceramic car coating comes in. Ceramic car coating (or glass coating for cars) uses nanotechnology to provide a layer of protection over your vehicle’s paint work. This protective coating for cars forms bonds with the substrate at the nanomolecular level, and will not wash away or break down like a wax. In a land of sea and sun and long car journeys, cars in Australia can use every bit of help they can get.
Ceramic car coating keeps the vehicle cleaner and shinier for longer. In this article we will describe the benefits of a ceramic coating for cars, how they are applied, and where you can find the best car paint protection coating products and professional applicators in Australia.
Why Australia is turning to ceramic coating for cars (aka glass coating)
Glass coatings, ceramic car coating, liquid glass, nano ceramic coating, ceramic glass, nano coating for car, car paint protection coating, is there a difference between all these products? Well, no, not really. All these terms are used to describe a nano coating based on silica/silicon dioxide (a key ingredient in glass). These nano coatings are hydrophobic, hard, heat and weather resistant, and this is what makes them so perfect for your vehicle. A ceramic car coating makes your car paint more resilient, and easier to clean. This is because they are:
- UV-proof : When your vehicle is exposed to the sun, the paint will begin to oxidise and fade, a phenomenon recognisable to all Australian states and territories. A ceramic coating for cars provides a barrier which protects from this effect.
- Chemical resistant: Acidic fluids and salt will stain and etch a paint job (including bird droppings and dead bugs), but with a glass coating car paint is protected by clear coat which prevents these destructive elements from penetrating.
- Hydrophobic: They repel water, so water will bead on the surface and slide off. It is also more difficult for mud and grime to adhere to the surface, making washing easier and less frequent.
- Extremely glossy: A ceramic car coating coats your car in a slick, self-cleaning surface which makes your car glossy and shiny, like it just came out of the shop.
Ceramic car coating cost in comparison to traditional car paint protection
In Australia there are almost 19 million registered motor vehicles which all need protection from the elements to last as long as possible. Often the factory applied clear coating is enough for protection, but it does require maintenance to retain its shine. Ceramic and glass coatings are a relatively new solution for protecting car paint; despite the two terms, their compositions are very similar: both are car paint protection coatings. They are slowly replacing the more traditional waxing and hard waxing. In the table below you can see how ceramic car coating compares to waxing and hard waxing in price and durability.
|Car paint protection coating||Durability||Price from|
|Hard waxing||up to a year||$190.00|
|Ceramic car coating||from 1 to 5 years depending on the product||$520.00|
The ceramic coating prices and waxing costs given are merely indications and include application costs. Note that the ceramic coating price range is wider than the one of more traditional car paint protection methods.
Ceramic coat car paint – the application process
Applying a ceramic coat is an intensive operation and, like other automotive coating options, requires an experienced and qualified professional to apply them to your car. Glass coating is a delicate process and hiring an authorised detailer will, for most people, mean the best ceramic coat car paint protection. There are, however, car ceramic coating kits available which can be applied at home, if you wish to do so. Note that when applied at home, a flawless result CANNOT be guaranteed – glass coating requires an absolutely contaminant free environment which can rarely be achieved in a private garage. Therefore, the best car paint protection can be achieved when the coating is applied by a professional.
Like any coating application, the condition of the substrate is a key component. Before applying the coating, your car must be as clean and bare as possible; the coating will be easier to apply and work better the cleaner the car surface is to begin with. Though each individual product may have slightly different application requirements (and you should always follow the specific instructions), the basic procedure is as follows:
- After washing and buffing the car, wipe it down again with a low percentage (15%) IPA solution and a microfibre cloth, to make sure there is as little contaminants and oils as possible left on the car surface.
- Take the applicator pad/cloth and apply the ceramic car coating in an X pattern across it. Only a very little of the coating will be needed.
- Using a circular or back and forth motion, wipe the glass coating onto a panel, applying to one panel at a time.
- After 5 minutes, check the application for irregularities or high points. If they are present, gently wipe over the surface with a microfibre cloth to smooth out the surface.
- Allow to cure. This step is especially important as this is when the nano ceramic coating forms crosslinks and becomes the protective coating for cars you need.
Below you can find some of the best ceramic coating for cars products, accompanied by ceramic coating price, that are suitable for at home applications assuming the near-professional environment can be created.
|Ceramic car coating product||Manufacturer||Price (indication)|
|Ceramic nano coating (PermaClear TopCoat)||Ceramic glass nano-coatings||$55.00 (100 ml)|
|Glass coating for windscreen (Optimum Opti-Glass)||Optimum Polymer Technologies Inc.||$130.00 (60 cc)|
|Paint Coating (Optimum Gloss-Coat)||Optimum Polymer Technologies Inc.||$100.00 (10 cc)|
Remember that, no matter the hype, no coating is permanent unless well maintained. Even the best ceramic coating for cars will degrade if not looked after, and will need reapplication every year to five years depending on the coating to maintain the glass coat.
The best ceramic coat car paint protection applied by a professional
If you take your vehicle into a shop for a professionally ceramic car coating application, it will of course be more expensive than if you had applied it at home. You are paying for the work hours, but also the security of a trained and experienced professional. A ceramic car coating is an investment for the serious car lover. Where waxing is a quarterly expense, the best ceramic coating for cars is a one-off. A professional ceramic detail can cost anywhere from $500 up to $2,800 depending on the number of coats and surface treatment required for guaranteeing a perfect ceramic coating. Australia is a country of car enthusiasts and has many glass coating applicators from Sydney to Perth.
Ceramic coating Australia – Find an applicator
You can find ceramic car coating applicators per city via our city-specific articles:
- Ceramic coating Melbourne (Victoria)
- Ceramic coating Adelaide (South Australia)
- Ceramic coating Sydney (New South Wales)
If you are looking for information about a large scale project or industrial ceramic glass coating for cars, our experts are here to help. Just get in touch through the “Request a quote” button and we will help you find the right coating solution.